
Lancaster Chimneys, Scanned and Measured
Book a Lancaster Camera Inspection
Leave your name, phone and street. A call back brings a Lancaster day and ask whether the fireplace is masonry or factory-built.
Lancaster ZIP Codes on Our Route
Give us the street when you call. It tells us the drive from North Hollywood and, often, what kind of fireplace to expect.
What to Book in Lancaster
For a metal flue in Lancaster, a chase top photo is easy to add on sweep day.
Chimney Sweep in Lancaster
Creosote and soot cleared first, so the camera scan that follows reads the real tile and not the buildup.
Learn MoreChimney Inspection in Lancaster
Level 1, 2 or 3 to NFPA 211, each part photographed with its measurement written beside the photo.
Learn MoreChimney Repair in Lancaster
Crown, joint and liner repairs sized to the cracks and gaps the report measured, and no further.
Learn MoreFireplace Inspection in Lancaster
Firebox panels, damper and smoke chamber checked, with crack lengths and hearth clearances noted down.
Learn MoreFireplace Repair in Lancaster
Refractory, damper and hearth fixes limited to the items the inspection photographed.
Learn MoreChimney Level 2 Inspection in Lancaster
A full camera scan of the flue for a sale, with a still of each joint and the readings in the report.
Learn MoreChimney Cap Installation in Lancaster
Stainless caps cut to a measurement of the flue tile, with spark arrestor mesh fitted on top.
Learn MoreChimney Flashing Repair in Lancaster
Step and counter flashing traced to the point where water enters, then replaced at that point.
Learn MoreChimney Masonry Repair in Lancaster
Tuckpointing on the joints the report marked, with mortar matched to the brick around them.
Learn MoreChimney Rebuilds in Lancaster
Partial or full rebuilds when the measured damage is past what a repair can hold, permits handled.
Learn MoreFireplace Cleaning in Lancaster
Firebox, glass and hearth cleaned, with anything out of the ordinary photographed for the record.
Learn MoreGas Fireplace Cleaning in Lancaster
Gas fireplace cleaning with a CO reading taken and written down, pilot and burner included.
Learn MoreGas Fireplace Repair in Lancaster
The failed part found by testing, named in the visit notes, and replaced on its own.
Learn MoreFireplace Remodel in Lancaster
Surrounds, mantels and conversions that start from a measured check of the firebox and flue.
Learn MoreFireplace Inserts in Lancaster
Inserts chosen from the firebox and flue dimensions we take on the first visit, liner included.
Learn MorePellet Stove Repair in Lancaster
Pellet stove faults tested part by part, so the invoice covers the one part that failed.
Learn MoreWood Stove Repair in Lancaster
Baffle, firebrick, door gasket and combustor checked for wear. Only the worn ones get swapped.
Learn MoreGas Logs in Lancaster
Vented or ventless sets sized to the firebox measurements and the room, gas line included.
Learn MoreWhat the scan and the tape show in Lancaster
Only about a third of Lancaster homes predate 1980, and a metal flue over a factory-built unit is the usual setup. For those, what matters is whether parts match the listing, so label, pipe and cap all get checked before we discuss any changes. Freeze-thaw cycles, grit on the wind and swings from 100 degree days to freezing nights all attack crowns, caps and chase tops. A big fault, the San Andreas, follows the valley's southern edge, so pipe joints get checked for separation.
The Houses
On our Lancaster visits: newer houses from the 1980s through 2000s with factory-built fireplaces, and few older masonry homes.
What We Measure
Pipe diameter, listing label data, chase cover size, and wind-scoured cap surfaces.
What the Camera Checks
Separated pipe joints and any rust at the chase top where grit has opened the paint.
How the Repair Is Scoped
Listed parts only: anything that does not match the label is named as a mismatch.
See It First
Book a camera inspection for your Lancaster chimney.
One visit covers the sweep, the scan and the measurements. The report with the photos comes with it.
