A North Hollywood Chimney Company That Measures First

Ask for a Camera Inspection

Why We Measure Before We Quote

Precision Chimney Pros works from North Hollywood, in the east San Fernando Valley. Most of what goes wrong with a chimney happens inside the flue, where nobody can see it from the firebox or the roof. A cracked tile, an open joint or a gap in a liner looks the same as a sound one until a camera goes up.

So the camera goes up on every inspection, after the sweep, section by section. We save stills of what it shows, photograph the cap, crown, damper and firebox, and measure what a repair would depend on: the flue size, the length of a crack, the firebox opening.

Those photos and numbers go into a report you keep. Any repair we suggest points back to something in that report. If the scan found two open joints, the repair covers two open joints, and you decide whether and when it gets done.

Scan
Camera up the flue
Tape
Cracks and openings measured
Photos
Of each part, in the report
Yes
From you before any repair

Four Rules for Every Precision Visit

The same four rules apply to a sweep in North Hollywood and a rebuild in Simi Valley.

Camera Before Opinion

We do not guess at the inside of a flue. The camera goes up first, and what it shows decides the rest of the visit.

Numbers in the Report

Crack lengths, flue sizes and firebox openings are written down beside the photos, so anyone reading the report sees the same thing we did.

Scope Matches Findings

A repair covers the joints, cracks and parts the report marked. Sound work stays as it is.

Photos You Keep

The report is yours. Keep it with the house papers, compare it with the next one, or hand it to a buyer.

What the Report Gives You

Keep it with the house papers. The next visit compares against it, and a buyer will ask for it.

Stills from the flue scan
Measurements beside each photo
The NFPA 211 level that was done

What Does Your Flue Look Like Inside?

Book a sweep and camera inspection with Precision Chimney Pros. You get the photos and the measurements, and then you decide what, if anything, comes next.

Call (820) 345-0337
Call (820) 345-0337