
Dana Point Chimneys, Scanned and Measured
Book a Dana Point Camera Inspection
Leave your name, phone and street. A call back brings a Dana Point day and ask whether the fireplace is masonry or factory-built.
Dana Point ZIP Codes on Our Route
Give us the street when you call. It tells us the drive from North Hollywood and, often, what kind of fireplace to expect.
What to Book in Dana Point
Bluff homes in Dana Point can add a plumb reading to the chimney sweep.
Chimney Sweep in Dana Point
Creosote and soot cleared first, so the camera scan that follows reads the real tile and not the buildup.
Learn MoreChimney Inspection in Dana Point
Level 1, 2 or 3 to NFPA 211, each part photographed with its measurement written beside the photo.
Learn MoreChimney Repair in Dana Point
Crown, joint and liner repairs sized to the cracks and gaps the report measured, and no further.
Learn MoreFireplace Inspection in Dana Point
Firebox panels, damper and smoke chamber checked, with crack lengths and hearth clearances noted down.
Learn MoreFireplace Repair in Dana Point
Refractory, damper and hearth fixes limited to the items the inspection photographed.
Learn MoreChimney Level 2 Inspection in Dana Point
A full camera scan of the flue for a sale, with a still of each joint and the readings in the report.
Learn MoreChimney Cap Installation in Dana Point
Stainless caps cut to a measurement of the flue tile, with spark arrestor mesh fitted on top.
Learn MoreChimney Flashing Repair in Dana Point
Step and counter flashing traced to the point where water enters, then replaced at that point.
Learn MoreChimney Masonry Repair in Dana Point
Tuckpointing on the joints the report marked, with mortar matched to the brick around them.
Learn MoreChimney Rebuilds in Dana Point
Partial or full rebuilds when the measured damage is past what a repair can hold, permits handled.
Learn MoreFireplace Cleaning in Dana Point
Firebox, glass and hearth cleaned, with anything out of the ordinary photographed for the record.
Learn MoreGas Fireplace Cleaning in Dana Point
Gas fireplace cleaning with a CO reading taken and written down, pilot and burner included.
Learn MoreGas Fireplace Repair in Dana Point
The failed part found by testing, named in the visit notes, and replaced on its own.
Learn MoreFireplace Remodel in Dana Point
Surrounds, mantels and conversions that start from a measured check of the firebox and flue.
Learn MoreFireplace Inserts in Dana Point
Inserts chosen from the firebox and flue dimensions we take on the first visit, liner included.
Learn MorePellet Stove Repair in Dana Point
Pellet stove faults tested part by part, so the invoice covers the one part that failed.
Learn MoreWood Stove Repair in Dana Point
Baffle, firebrick, door gasket and combustor checked for wear. Only the worn ones get swapped.
Learn MoreGas Logs in Dana Point
Vented or ventless sets sized to the firebox measurements and the room, gas line included.
Learn MoreWhat the scan and the tape show in Dana Point
Sidney Woodruff's 1920s streets gave the Lantern Village its Spanish look, and an original stack there deserves careful photos before work. Most homes came later, about half before 1980, so we also read metal unit labels and check bluff lots for any lean. May and June fog and cool summers keep things damp more than hot. Rain lands from November to March, and frost is rare. Landslides on the coastal bluffs and an offshore fault zone mean a plumb reading can matter as much as a rust reading.
The Houses
On our Dana Point visits: 1920s Spanish-style Lantern Village homes, later houses and condos, and bluff-side properties.
What We Measure
Plumb reading on bluff lots, salt wear, and label data on metal units.
What the Camera Checks
Older Lantern Village flues, and damp upper sections on coastal homes.
How the Repair Is Scoped
Ground issues are named as ground issues, not presented as a chimney repair.
See It First
Book a camera inspection for your Dana Point chimney.
One visit covers the sweep, the scan and the measurements. The report with the photos comes with it.
